GoDEX RT200i vs TSC TTP-286MT
Side-by-side comparison of barcode printers specs, hardware, and features to help you pick the right one for your use case.
Mini 2-inch desktop thermal transfer printer with industrial-grade performance, ideal for jewelry, electronic component and small label printing.
8-inch ultra-wide industrial printer, ideal for GHS chemical labels, large compliance labels and wide logistics labels.
Which one should you pick?
Both GoDEX RT200i and TSC TTP-286MT are proven barcode printers options sold through JUNJI as an authorized distributor. GoDEX RT200i suits users who prioritize mid-range value with strong specs. TSC TTP-286MT is a better fit for lower-cost rollouts with fast part availability. Request a quote and we'll match you to the exact configuration for your workflow.
Full spec comparison
| Specification | GoDEX RT200i | TSC TTP-286MT |
|---|---|---|
| Print Method | 熱感式 / 熱轉印 (Direct Thermal / Thermal Transfer) | 熱感式 / 熱轉印 (Direct Thermal / Thermal Transfer) |
| Resolution | 203 dpi (8 dots/mm) | 203 dpi (8 dots/mm) |
| Print Speed | 177 mm/s (7 ips) | 152 mm/s (6 ips) |
| Print Width | 54 mm (2.12") | 216 mm (8.5") |
| Max Print Length | 1,727 mm (68") | 11,430 mm (450") |
| CPU | 32-bit RISC CPU | 536 MHz 32-bit RISC |
| Memory | 16 MB SDRAM / 8 MB Flash (4 MB 使用者儲存) | 256 MB SDRAM / 512 MB Flash（SD 卡擴充至 32 GB） |
| Sensors | 標籤間距 (Gap) + 黑標 (Black Mark) | — |
| Media Types | 連續紙 / 模切標籤 / 黑標 / 折頁 | 連續紙 / 模切標籤 / 折頁 / 吊牌 / 缺口 / 黑標 / 打孔 |
| Media Roll OD | 最大 127 mm (5") | 最大 208.3 mm (8.2") |
| Media Core | 25.4 mm (1") / 38.1 mm (1.5") | 76.2 mm (3") |
| Ribbon Length | 最大 110 m (360') | 最大 600 m |
| Ribbon Width | 56 – 59 mm (2.20" – 2.32") | 109.2 – 254 mm (4.3" – 10") |
| Interface | USB 2.0 (B-Type) + USB Host (A-Type) + RS-232 (DB-9) + Ethernet (RJ-45) | Ethernet + USB 2.0 + USB Host + Parallel + RS-232 Serial；選配 Bluetooth |
| Programming Language | EZPL / GEPL / GZPL | TSPL-EZD（相容 Line Mode、Eltron、Zebra） |
| Display | 彩色 TFT LCD + 導航按鍵 + 電源 / FEED / 校正鍵 | 4.3" 彩色觸控 LCD + 6 顆按鍵 |
| Media Width | — | 最大 241.3 mm (9.5") |
| Construction | — | 全壓鑄鋁合金骨架，中央基準媒材處理機構 |
| Options | — | Guillotine 裁刀 / 重型裁刀（全切） |
Differences highlighted. Data source: JUNJI product catalog (19 spec rows compared).